MAXIFY iB4040 Default

PIXMA MG6440 Setup and Troubleshooting Videos

These video FAQ's provide detailed, step by step instructions which are specific to your product and have been created to guide you through the most common setup tasks required to prepare your PIXMA all-in-one. There are also some helpful troubleshooting videos which guide you through some of the most common printing problems you may encounter when using your product.

Setting up your device

Setting up the printer

This video shows you how to set up the printer from the box and includes removing the protective packaging and connecting the device ready for use.

Setting up the ink tank

This video shows you how to correctly prepare and install the ink cartridges into your device.

Loading paper

This video shows you how to load paper into your device.

How to align print head position

This video shows you how to align the print head position correctly.

Troubleshooting

Cleaning the print head nozzles

This video shows you how to check the print head nozzles and perform a cleaning operation if necessary.

Perform automatic print head alignment

If your prints are not correctly aligned, this video will show you how to resolve this issue by performing the automatic head alignment function.

Remove paper jam from the paper feed unit

This video shows you how to remove a paper jam from the paper feed unit if necessary.

Remove paper jam from inside the printer

This video shows you how to remove a paper jam from inside the printer unit if necessary.

Remove paper jam from the paper output slot

This video shows you how to remove a paper jam from the paper output slot if necessary.

How to clean inside the printer

This video shows you how to clean the inside of the printer if your paper gets dirty when printing.

These movie files are using OSS as detailed below:

jquery-1.4.2.min.js and jquery-ui-1.8.2.custom.min.js

You might also need...

Feedback